Connections

The optimum connection of the Lateral Guide to the roller conveyor

The I-shaped and Z-shaped Adjustment Rods are made of zinc-plated steel and are attached to the Lateral Guide Profile FLOWGUIDE by means of the Clamp Holder Ø12. Mounted on the side of the roller conveyor, this design provides safe guidance of the transported goods and at the same time stabilizes the entire Lateral Guide. This results in a higher overall efficiency and reliability of the conveyor system – and a safe working environment.

Adjustment rods for guiding and supporting conveyed goods:

Fewer malfunctions – lower maintenance costs

as well as a clamp holder for connecting the adjustment rod to the lateral guide profile

Adjustment Rod I-shape Ø12 FLOWGUIDE (available in lengths of 205 and 325 mm)

The I-shaped Ø12 FLOWGUIDE Adjustment Rod is particularly suitable for applications where the Lateral Guide must withstand stronger impacts. Available in two lengths, the height of the entire Lateral Guide module can be optimally adjusted.

Adjustment Rod Z-shape Ø12 FLOWGUIDE (available in lengths of 205 and 325 mm)

The Z-shaped Ø12 FLOWGUIDE Adjustment Rod allows the Lateral Guide Profiles to be positioned precisely. Turning outwards creates a funnel-shaped Lateral Guide, turning inwards causes it to taper. This means that a wide range of transport unit sizes can be conveyed, making the conveyor system particularly flexible.

Clamp Holder Ø12 adjustable for Lateral Guide Profile FLOWGUIDE (Set)

With the Clamp Holder Ø12 adjustable for Lateral Guide Profile FLOWGUIDE (Set), the Adjustment Rod is simply clamped to the Lateral Guide Profile FLOWGUIDE. It also holds other 12mm diameter components and parts securely in position. The Lateral Guide Profile, Adjustment Rod, and Clamp Holder form the lateral guide module above the roller conveyor.

ENRICH YOUR WORKING LIFE.

Do you use a Conveyor Profile 1? You can then fasten the Lateral Guide directly using the specially designed brackets:

Connection of the Lateral Guide with adjustment rod to the Conveyor Profile 1

Holder Ø12 FLOWGUIDE adjustable for Conveyor Profile 1 (Set)

With the Holder Ø12 FLOWGUIDE adjustable for Conveyor Profile 1 (Set), the FLOWGUIDE lateral guide is clamped directly to the Conveyor Profile with adjustment rods. Sensors and reflectors with a diameter of 12mm also sit securely – directly in the frame. This makes your conveyor system even more versatile. The clamping function speeds up the installation and adjustment of the components.

Connection of the Lateral Guide without adjustment rod to the Conveyor Profile 1

3in1: DIRECT CONNECTOR
Practical twist-on design – high stability

Holder Slot 10 FLOWGUIDE fixed for Conveyor Profile 1 (Set)

The Holder Slot 10 FLOWGUIDE fixed for Conveyor Profile 1 (Set) is suitable if a low side guide height is sufficient. It is screwed into the top of the side profile and clamps the Lateral Guide Profile securely in place. Thanks to the twist-on design, installation on the roller conveyor is completed in seconds – without tools.

Holder Slot 10 FLOWGUIDE fixed for Conveyor Profile 1, with Reflector (Set)

The Holder Slot 10 FLOWGUIDE fixed for Conveyor Profile 1, with Reflector (Set) is additionally equipped with a reflector. This component is particularly efficient as it combines two functions - the stable fastening of the side guide and the reflector function.